Environmental Monitoring - Products- Radionode

carbon monoxide

UA53-CO-1000

DAQ carbon monoxide gas sensor

Built-in sensors: carbon monoxide (0 ~ 1000 ppm), temperature (-20 ~ 40 ℃), humidity (5 ~ 95%)
· Can be used for 5 years with electrochemical formula
· Calibration certificate provided
· Calibration software provided
Real-time output of measurement values via USB / Control with simple AT commands
· Windows, Android, Linux
For indoor air quality measurement
Components: UA53-CO-1000 (1 pc.), USB extension cable (1 pc., 1.5M), manufacturer's calibration certificate
· Additional device for web monitoring: RN17Xplus sensor data transmitter

QuoteQuestion To list

UA53-CO-1000, carbon monoxide meter

carbon monoxide

Local monitoring by connecting to a smartphone or PC
Remote monitoring by connecting to RN17Xplus

high accuracy reliable
Sending the manufacturer's calibration certificate
IoT environment digital output
Affordable carbon monoxide sensor
replaceable sensor comfortable
Proceed with calibration by unplugging it like USB

Prevention of gas accidents with fast detection, carbon monoxide sensor UA53-CO

A sensor that outputs data via USB, prepared for IoT

Carbon monoxide concentration, temperature and humidity
Measure in real time.
with an electrochemical sensor
It can be used for 5 years.
For safe use,
Manufacturer's calibration certificate is provided.
accurately
It only reacts to the target gas.
Monitoring for local/remote
Software support.
data in user software.
can be sent.

How to connect Radionode UA sensor

variety Sensor data monitoring software

Choose the best monitoring software for your site.

UA53-CO, carbon monoxide sensor Features

Basic sensor, high accuracy
'Accuracy' is not an important factor to be considered when selecting a sensor. When purchasing products, the manufacturer's calibration sheet is enclosed, and if you use the UA Calibrator software, you can calibrate the value of the analog sensor used with the UA Series more precisely.
Trending IoT, digital data output
It is automatically recognized as a USB-SERIAL device in Windows, Mac, Android and Linux using USB CDC.
Do you know the AT command used in the phone line modem? You can easily get sensor information with AT command only. Get information easily with AT commands instead of 4-20mA output.
Easy maintenance, calibration by pulling out like USB
In Korea, it is recommended to calibrate the sensor once a year to check the accuracy of the sensor. Since the UA Series is a USB type sensor, calibration and sensor replacement are very convenient. Ah! You can use it simply by plugging it into a USB port without any installation work, so cost savings can be realized now.
Remote monitoring, software provided
The advantage of UA products is that they enable real-time recording. We have prepared a variety of software to enable real-time recording with only UA devices. There are Tapaculo Lite (a program for PC) and Tapaculo Mobile (an Android app). After installing the software, connect the UA device to USB.

UA53-CO, carbon monoxide sensor How to use

Various software development and IoT industrial environment construction
Gas transmitter with USB output

When a sensor is connected to a general transmitter, the measured value is output as a current, so it is very difficult to process it in software, and it is difficult to build an IoT environment in the industrial field. To solve this problem, we developed a gas sensor with USB output.
Film-printed electrochemical sensor with good cost-effectiveness
Fast response speed, accurate measurement

The carbon monoxide sensor mounted on the UA53-CO performs meaningful measurements that respond only to the target gas with little or no response to other gases. Low maintenance cost allows real-time detection and monitoring of carbon monoxide at low cost.
Smart and convenient maintenance
Dedicated calibration software

UA53-CO sensor with second-to-second measurement, precision control at no extra cost. Check with the dedicated calibration provided free of charge by the manufacturer. After running the program, plug it into the USB port and the product will be recognized, so you can proceed with the setup immediately.
smart data management program
Provides various software according to the usage environment

We provide 3 types of ready-to-wear sensor data monitoring software for free, such as a Cloud Serivce version, a PC version, and an Android version. If you need it, please request the SDK.

UA53_CO_English_detail page1.png

UA53_CO_English_detail page3.png

UA53_CO_English_detail page4.png

UA53_CO_English_detailed page5_5.png

UA series_English_detailed page6.png

UA53_CO_English_detailed page7_7.png

UA53_CO_English_detail page8.png