Main

Graphs and hourly average data values ​​are shown in tables and graphs

The Most basic chart, showing sensor data in its original form

Select inquiry period by 24 hours, 1 week or 1 month

Charts of multiple channels show sensor data in raw form

Up to 8 channels can be compared simultaneously

Search period can be selected by 24 hours, 1 week or 1 month

Application example: Check refrigerator performance by comparing the temperatures of multiple refrigerators at the same time

Converts the data at each time point to cumulative amount and displays them in graphs and tables

Up to 2 channels can be compared simultaneously

Select inquiry period by 24 hours, 1 week or 1 month

Application example: Converting flow rate and instantaneous power data into flow rate and electric power to inquire cumulative amount

Shows the uptime of a specific device in graphs and tables

Up to 2 channels can be compared simultaneously

Search period can be selected by 24 hours or 1 month

Usage Example: Daily Pump Uptime Query

Graphs and tables show the amount of time a specific sensor is out of standard conditions

Up to 2 channels can be compared simultaneously

Search period can be selected by 24 hours or 1 month

Application example: In the case of vaccines, the sum of the times outside the storage standard temperature can be immediately checked

Report name, person in charge, and channel information written on one A4 sheet of daily report form

Displays the average, maximum, and minimum values ​​of channels per hour in the form of a table

Offers line, area, and column charts

If you set upper and lower limits on the chart, you can immediately check whether it is out of the normal range.

If you schedule e-mail delivery, you can receive the report by e-mail at the set time period.

Report name, person in charge, and channel information written on one A4 sheet of daily report form

Displays the average, maximum, and minimum values ​​of channels per hour in the form of a table

Offers line, area, and column charts

If you set upper and lower limits on the chart, you can immediately check whether it is out of the normal range.

If you schedule e-mail delivery, you can receive the report by e-mail at the set time period.

Report name, person in charge, and channel information written on one A4 sheet of daily report form

Displays the average, maximum, and minimum values ​​of channels per hour in the form of a table

Offers line, area, and column charts

If you set upper and lower limits on the chart, you can immediately check whether it is out of the normal range.

If you schedule e-mail delivery, you can receive the report by e-mail at the set time period.

Report automatically generated based on monthly data in one A4 MKT Report form

Company logo, report name, person in charge, channel information, channel statistics (maximum/minimum value, average value, MKT), installation location, anti-counterfeiting QR code, alarm sending details, operating standards (appropriate temperature range, equipment setting temperature), payment column indication

Line chart provided

If you schedule e-mail delivery, you can receive the report by e-mail at the set time period.

If you schedule e-mail delivery, you can receive the report by e-mail at the set time period.

If an appropriate range is specified for each channel, an alarm is sent to the person in charge when the threshold is exceeded

Alarm sending method: phone call, text message, email, dashboard (color change, blinking display)

Application of TTS multilingual voice engine to notify risk in the language of field personnel

Multiple alarm recipients can be assigned to the same channel

Alarm recipients can be designated by day of the week

Multiple titration ranges can be assigned to the same channel

Possible to set exception conditions for alarm sending (ignore first notification, ignore duplicate detection, set exception time for alarm sending)

Usage example: Set exceptions for sending alarms at 10-11:10 am during normal shipping, set a XNUMX-minute first notification ignore period so that alarms are not sent for a while while vaccines are being taken out

Send an alarm to the person in charge when sensor information cannot be collected due to site network disconnection

Send a battery replacement alert to the person in charge when the device's battery is low

When a power outage occurs at the site, an outage alarm is sent to the person in charge

Able to register and edit contacts to receive alarms

Contacts for receiving text messages and contacts for voice calls can be registered separately

Bulk address book upload/download possible

Alarm rejection days can be set for each person in charge

Check the alarm detection/transmission history by setting the search period

Inquiry of the channel name where the alarm was detected, normal range, deviation value, alarm sending type, sending message, alarm reception status

Display notification by changing the widget color to red when a channel deviates from the threshold in the widget view dashboard.

In the image view dashboard, a notification is displayed by changing the color of the widget and blinking when a channel exceeds the threshold.

Phone alarm can be set menu: Threshold deviation notification

SMS/LMS alarm setting menu: Threshold deviation notification, network disconnection notification, battery replacement notification, power outage notification

E-mail alarm setting menu: Threshold deviation notification, network disconnection notification, battery replacement notification, power outage notification, report

Automatically recognizing that a deviation event has occurred and assigning an incident number

A Deviation Report is automatically generated at the end of an incident

Report expression information: deviation occurrence channel, deviation occurrence time, duration, graph, alarm recipient, etc.

Possible to describe the cause of the incident and the action taken in the Deviation Report

Automatically search for the point in time when deviation occurred, move to and view past events

Credit deduction for sending phone alerts

You can top up your phone credit only as much as you need

Credit deduction when text alerts are sent

You can top up your phone credit only as much as you need

Credit deduction when sending email alerts

You can top up your phone credit only as much as you need

View monthly/yearly credit consumption details

See when/what type of alerts were sent out the Most

It is possible to establish an annual health and safety budget by identifying past credit consumption history

Provide proof of credit charge expenditure

QR code device registration support

IP band device registration support

After device registration, information management such as device name, number of channels, installation location, remaining battery level, and power outage management

After channel registration, information management such as channel name, unit, current value, signal strength, measurement period, transmission period, and latest update time

View historical data charts for 2 weeks from the selected date and download measurement values

Creating virtual channels by applying calculation formulas to channel combinations and channels

Application Example: Calculation of dew point by combining field sensor values, that is, temperature and humidity values

Search for the year in which you want to back up data and back up/download data on a monthly basis

Measured by each device Data measured at each measurement cycle can be downloaded as a CSV file

FTP server backup available

Supports various file formats so that sensor monitoring information can be downloaded and used immediately

Save data related to monitoring such as measured channel data (sensor value) and usage history to the Cloud Serivce

Maximum Cloud Serivce storage period: 3 years in the past from the current point in time

Numeric widget showing sensor values

A text widget that converts the sensor value into a state by section and informs you

Cumulative Usage Widget

Uptime Widget

Threshold Time Out Widget

Full screen that can be used as a status board reflecting the customer logo

Quick report that tells you the sensor value every hour

Numeric widget showing sensor values

A chart widget showing sensor values ​​and fluctuation trends

A point widget that indicates whether the threshold is exceeded

Displays an alarm by changing the color of the widget and blinking when the threshold is exceeded

Multiple image views can be registered

When setting the full screen, the registered image view is sequentially switched and displayed

Utilize widgets that require special management in the widget dashboard

Notifies the person in charge of the sensor value by SMS at each set time slot

Query who, when, what, and how manipulated in relation to monitoring

Check payment history

View user access history

System notification history inquiry function

Up to 5 years of history can be checked

Provides a Radionode365 interface for developers to easily use data related to devices and channels

JSON/XML support as Open API output format

Provides data within up to 24 hours

Limit number of calls per minute per IP: up to 10