Main

It is designed to make channel expansion easier with external sensor support. General-purpose K-type thermocouple (high temperature), T-type thermocouple (low temperature), and PT100 (ultra-low temperature) analog temperature sensors can be directly connected without a separate transmitter. It also has a dedicated calibration function to ensure precise temperature.

All data measured by the RN400 is stored in F-RAM. F-RAM is a non-volatile memory whose contents are not erased even without power. It is 100 times faster than general flash memory and has very high write endurance. Measured data is stored in F-RAM, and the data is transmitted to the location desired by the user every transmission cycle. Even when Wi-Fi is disconnected, data is still saved, so monitor with confidence.

Are you still using a paper recorder or a memory type recorder? RN400 stores all data in memory and transmits the stored data to Radionode365. The Cloud Serivce-based monitoring software 'Radionode365' not only provides massive storage capacity, but also provides various functions with stored data. If you tell us your requirements, we will determine whether development is possible and proceed with the update. If you want to send it to your server, please ask a separate question.

RN400 was requested by multinational corporations for high-grade Wi-Fi functions from the time of planning. The RN400 is therefore implemented to support enterprise security. This is a function that is not commonly used in home wireless routers, and is often used by businesses that require a high level of security. In order to use Wi-Fi in the Wi-Fi Enterprise security level, you can register not only the Wi-Fi password but also a separate ID/PASSWORD to the computer team and use it after receiving a usable certificate from the computer team.

Industrial sites in various environments exist. We have launched the RN400 product with waterproof specifications by reflecting the requirements of various fields such as meat processing companies that clean with water or pharmaceutical/bio that disinfects chemicals. The RN400 T2 that measures temperature is IP67 rated, and the outer housing is finished with a gasket, and the input/output part of the sensor is treated with a cable gland.

Since the RN400 uses a battery for Wi-Fi communication, the battery consumption must be well designed. It does not consume the battery when it is not in the measurement cycle, and uses the battery only for measurement/transmission. DC power supply is also available. At this time, the BUILT-IN UPS function is implemented in a circuit so that the built-in battery can act as an auxiliary power immediately in the event of a power outage. Even if there is a power outage, the data collection function is performed normally.